FREYARA FacialPure 5.0 Ultra Dual-Handle Laser System with 6 Probes

How to use?

The instrument needs to be filled with water before turning it on:

1. Open the overflow hole

2. Put the funnel into the water filling hole and add distilled water or purified water (to avoid clogging the water outlet hole)

3. If water seeps out of the overflow hole, it means that the instrument is full of water. Stop adding water and screw the nut back to the overflow hole

4. Turn on the instrument for use

Tip: If you use the instrument every day, add water once every half a month. If you do not use it every day, add water once a month. Replace all the water in the instrument every two months

Eyebrow washing process and precautions

1. Clean the operation area. (Washing eyebrows requires thick application of gel to prevent white eyebrows)

2. Wash from the end of the eyebrows, use a cotton swab to swipe the eyebrows, and the skin will turn white. After the operation, wipe the gel clean, apply erythromycin ointment, wrap a layer of plastic wrap, and ice for 15 minutes

3. If the skin is not broken after the operation, it is recommended to touch water after about 24 hours. If the skin is broken, it cannot touch water before the scab is formed and recovered. Apply erythromycin ointment after the scab to prevent infection. If the skin is not broken but it is more red and swollen, ice it once for the first three days, each time for 15 minutes

4. Normal color eyebrows are applied close to the skin, do not pull the distance, test it close to the skin to see if the skin turns white, if not, raise it 0.5cm, and the maximum should not exceed 1cm

5. Eyebrow washing can only be done once, and it cannot be repeated. Repeated application will cause swelling or bleeding

6. The frequency of the eyebrow washing machine should not be turned too high. If the speed is too fast, white eyebrows will appear. If the eyebrows are white, apply saline for 48 hours and they will recover

7. It is not recommended to operate eyeliner. Practice eyeliner after you are proficient in eyebrow washing

8. Check whether the skin has inflammation before washing eyebrows. If you have a scar physique or an allergic physique, you should use it with caution. It is not suitable for patients with diabetes and heart disease

9. Keep the treatment area clean and avoid friction and infection. During the period of redness and swelling, erythromycin can be used. Apply erythromycin ointment 1 to 2 times a day to prevent infection. It is not advisable to participate in strenuous exercise before the scab falls off (so as not to cause infection after sweating), do not wear makeup, do not rub the skin, do not apply facial masks, do not drink alcohol, and prohibit the use of aspirin. Pay attention to sun protection, otherwise pigmentation may occur, and scars may appear after infection

Which types of people are not recommended to wash eyebrows?

1. People who have washed eyebrows many times: because the epidermis and dermis become thinner, the relative risk of washing eyebrows is also higher

2. People who are particularly prone to scarring: People who are prone to scarring on their bodies are prone to scarring or leaving scars, so it is not recommended to wash eyebrows

3. People with deep eyebrow tattoos: People who have deep eyebrow tattoos are not suitable for eyebrow removal. General eyebrow removal machines usually cannot handle it very effectively and the effect is not good

4. People with obsessive-compulsive personality tendencies: People with obsessive-compulsive personality tend to be nervous, anxious, eager to do well and have high demands on themselves. Therefore, even if they are very successful, they will still be dissatisfied

Tattoo removal operation and precautions

1. The recommended distance between tattoo removal and skin is 1-3 cm

2. Tattoo removal is not recommended for those who have had a tattoo for less than one year, and the effect will not be ideal

3. Before tattoo removal, use more than 75% medical alcohol to clean the skin, because there is a stratum corneum and dirt on the skin, so it is not easy to get infected after washing

4. If you can tolerate the pain of tattoo removal, do not apply anesthetics. Anesthetics are easy to proliferate. After tattoo removal, you can apply erythromycin ointment and ice for 15 minutes to prevent blistering and infection

5. When removing tattoos, you can only apply it once at the tattoo site, and you cannot apply it repeatedly

6. The tattoo will scab about 2 days after washing. Remember not to touch water before the scab forms. The scab must fall off naturally and cannot be picked off by hand to prevent scars!

7. After tattoo removal, you can choose to take oral anti-inflammatory drugs for 2-3 days and external repair products to assist skin metabolism

8. Avoid sun exposure and sweating after washing. Avoid spicy foods and dark foods such as soy sauce

9. The interval between tattoo removal is recommended to be more than 30 days, depending on the recovery situation

Precautions after freckle removal

1. The recommended distance for freckle removal is 1-2cm

2. After freckle removal, the skin may be red and swollen due to the energy irradiation, but this is normal. Sometimes there will be a slight heat sensation, but it will subside quickly.

3. After freckle removal, apply anti-inflammatory cream every day. The wound will slowly form a scab and fall off after about a week. At this time, the skin will be pink. During this process, pay attention to keep clean and avoid sun exposure, otherwise it will affect the effect of freckle removal.

4. If the pigment has not completely subsided after freckle removal, you don’t have to worry. You can have the next treatment in about 1 month.

5. Pay attention to continuous sun protection after surgery, eat less greasy and spicy food, keep a happy mood, and do not use whitening and irritating functional products.

6. On the 1st to 4th day after surgery, pay attention to "repair" work (apply growth factors), try not to touch water, use saline or distilled water to wipe, keep the treatment area clean and fresh, and apply some repair ointment.

7. Do not steam sauna or do strenuous exercise within seven days. Do not eat irritating and pigmented foods within seven days, such as coriander, celery, leek, spinach, chocolate, coffee, soy sauce, and prohibit smoking and drinking.

8. If there is scab, do not pick it with your hands, and do moisturizing care after ten days.

9. After a week, the wound will begin to scab and fall off. At this time, sun protection is an absolutely necessary step. Wear SPF30+ sunscreen when going out, and protect against the sun for at least 3-6 months.

Black Face Doll: It mainly has the effects of whitening, removing yellowness, controlling oil, and shrinking pores. A course of treatment is 3 to 5 times, and it can be done once a month.

1. After cleansing, apply a thin layer of gel (the gel should not be applied too thickly, as it will absorb light, and it will feel hot and tingling during operation, and it is difficult to blast and easily clog pores). After applying the gel, wait for the gel to dry before operating.

2. During operation, replace the black black face doll special operation head with energy between 200 and 500, mainly depending on the blasting force (the degree to which the gel can be blasted cleanly), 1-2cm away from the skin, and the frequency is 2~5hz (2hz is recommended for novices)

3. One part can only be applied once, not multiple times. Each part must be operated, and it cannot be applied casually, otherwise the blasting will not be clean and affect the effect

4. After the black face doll, you can wash your face with clean water after five minutes, and then apply a moisturizing mask, and then you can do normal skin care, and hydrate more in the later stage.

Probe function:

Non-invasive 1064nm red probe:

For washing black and blue eyebrows, eyeliner

Energy: 200-300mj, frequency: 1-3hz

Non-invasive 532nm blue probe:

Washing red, brown and coffee eyebrows

Energy: 200-300mj, frequency: 1-3hz

Minimally invasive 1064nm (colorless) probe:

Washing black and blue tattoos, removing deep spots

Tattoo removal energy: 300-600mj

Freckle removal energy: 600-10 00mj

Frequency: 1-3hz

Minimally invasive 532nm (colorless) probe:

Remove colored tattoos, remove shallow spots

Tattoo removal energy: 300-600mj

Spot removal energy: 600-1000mj

Frequency: 1-3hz

Black face doll probe:

Whitening, yellowing, oil control, shrink pores

Energy: 200-500mj, frequency: 2-5hz

Eyeliner Probe:

Remove eyeliner

Energy: 200-400mj, frequency: 1-3hz

CAUTION

1. Keep the pedal pressed and do not release it, not one step at a time, this design is safer!

2. Practice on A4 paper before use. You can use a pen to blacken and operate the instrument on the black text

3. Be careful not to switch on and off at will, it is very dangerous!

4. Women cannot use it during menstruation

5. It is not recommended to operate it by yourself. You need to wear an eye mask when using it to avoid accidental injury to your eyes

6.Before using for the first time, the water tank must be filled with water

Specifications:

Pulse energy: 500-2900MJ

Pulse width: 3-20NS

Frequency speed: 1-10HZ

Voltage:110V-240V

Power: 5000W

Wavelength: 1064nm/785nm/532nm

Weight: 10KG

Size: 46*34*36CM

Packing List:

Picosecond Machine*1

Handle*1

Funnel*1

Pedal*1

Goggles*1

Eye Protection*1

Operation Head*6

Manual*1