FREYARA FacialDefy 2.0 Pro Multi-Depth HIFU Facial Device

【Clinic-Level Power in a Handheld Device】Experience professional-grade skin tightening at home with a high-powered 28V system, delivering significantly stronger and more effective energy than battery-operated alternatives for visible, long-lasting results.
【Multi-Depth Targeting for Comprehensive Facial Rejuvenation】Precisely address skin concerns at every layer with 3 interchangeable heads (2.0mm, 3.0mm, 4.5mm), from smoothing fine lines in the epidermis to lifting sagging contours by stimulating the foundational SMAS fascia layer.
【No Ongoing Costs with Unlimited Shots】Enjoy truly sustainable beauty with a consumable-free system and unlimited usage, unlike many devices that require expensive replacement tips or cartridges, making it a cost-effective long-term investment.
【Visible Lifting & Firming in Just One Cycle】Achieve a noticeably tighter, more sculpted complexion, with clinical-style before-and-after results showcasing reduced wrinkles, improved contours, and revitalized skin support.
【Intuitive & Safe Home Operation】Navigate treatments confidently with a clear digital screen (1-9 intensity levels) and built-in safety protocols, ensuring gradual energy adjustment and controlled movement for a salon-worthy yet safe experience.

How to used?
1.Firstly, clean the operating area thoroughly (if there is makeup, use makeup remover to remove it first, and then clean it with facial makeup cleanser)
2.Connect the power cord to the host. When the tpeyc interface of the power supply is plugged into the host, you will hear a clicking sound, indicating that the power socket has been connected in place. After the power plug is connected in place, the instrument will make a beeping sound of power on. Then press the circular button with the power symbol in the middle of the instrument and hold it for 3seconds to turn it on.Release the button immediately after turning onthe instrument, and the display screen will light up.
3.Press the gear button on the instrument to select the appropriate gear,and set the instrument gear to cycle setting, 1-9 cycles.(For the first three uses of the instrument, it is recommended to perform testing operations from the lowest gear.) 
4. Test energy intensity: First, pull at a constant speed from the lower right jaw position to the corner of the mouth. lf there is no sensation, increase energy until there is a faint toothpick lightly touching the skin.
5.Sensitive individuals may experience slight heat, stabbing pain, or soreness during operation, which is normal. lf the teeth are embedded with metal, they may feel a sudden increase in energy when operating the affected area. After passing the area, the energy returns to normal, which is also a normal phenomenon.
6. When operating near the nose, it is necessary to lower the energy level(adjust the energy level according to personal situation), because positions with more bones are more sensitive and can withstand lower energy (the energy level varies depending on the operating site, and needs to be adjusted according to one's own situation)
7.Deep switching: There are two depth switches for the operation head, namely 2.0 and 3.0 switches. When the instrument does not use the switches,Depth of 4.5
8.Apply a layer of thick gel on the operating head, and then align the switch to be used with thesocket on the operating head and directly cover it. Aftercovering it, check the transparent part of the head film tosee whether there are bubbles or lack of gel, if there are no bubbles or lack of gel,You can start using it directly.
9. During operation, the operating part needs to be coated with media (the media can be essence, stock solution, gel, aloe gel, lotion, etc.). During operation, the probe must be close to the skin, moving upward at a constant speed, and the media needs to be supplemented immediately after being absorbed or dried.
10. The normal operation time for the entire face is approximately 30-45 
Minutes. (Everyone's face size is different, so the operation duration is also different)
11. After using the instrument, clean the residual medium on the probe with a wet towel, and the gel in the switch can be directly cleaned with water.
12. After the operation, clean the face with clean water or warm water, 
immediately apply a water replenishing facial mask, and take it off after 10-15 minutes. If the water on the facial mask paper is absorbed, replenish the water in time; (It is not recommended to wash your face with hot water). After the operation in autumn and winter, your skin may be extremely dehydrated. Therefore, it is recommended to apply a pure moisturizing facial mask three days before the operation.

Frequency of Use: 10 times per cycle. 
Normal skin: Use once every 5 days for the first 5 times; once every 10 days for the next 5 times. 
Sensitive skin: Use once every 10 days for the first 5 times; once every 15 days for the next 5 times.
Please read the instructions carefully before use

Precautions:
Individuals with the following symptoms should use thisdevice with caution and seek the advice of a doctor or professional before use. The details are as follows:
1. Clean the operating area thoroughly before use to prevent dirt or debris. Before operation,remove any metal objects from the head to avoid unforeseen situations that m ay affect the effectiveness.
2. It is not recommended to use during pregnancy, postpartum period, or menstrual period.
3. It isnot recommended to use the beauty device during the period of facial allergies. It is recommended to wait for a week after the allergy subsides before using it.
4. It is recommended to use the beauty device 20 days after facial injections such as hyaluronic acid or slimming injections.
5. It is recommended to avoid the area where prostheses and silicone are used for the operation site.
6. It is not recommended to use this area on the face where there are wounds, large areas of acne or pus.
7. It is not recommended to use patients with seriousdisease, heart disease, diabetes, mental illness, etc. 
8 Patients with serious skin disease, trans fection disease, or hormone face should use caution.
9.It is not recommended touse it during pregnancy, but it can be used after postpartum confinement when the body has recovered.
10. It is not recommended touse it if the face has undergone gold wire implantation. (metal wire cannot be absorbed)

Packing List:
HIFU Beauty Instrument*1
4.5mm Probe* 1(Installed on the beauty instrument)
2.0mm Regulator* 1
3.0mm Regulator* 1
Power supply* 1
Syringe *1
Manual*1

Specifications:
Product name: HlFU beauty instrument
Product model: Z-2411
working voltage:28V
Applicable voltage: 210-240V
Power:28-56W
HIFU frequency: 3MHZ
Electric current: 1A
Adjustment gear: 1-9 gears
Product size: 21*4.2*4.6cm
Net weight: 350g
Packaging size: 24*17.5*6.8cm
Weight with packaging: 680g